Located in Scenic Southern Utah

369 N. 100 W. Unit #2 Cedar City, UT 84721

Phone: (435) 865-5762 Fax: (435)865-5772

Owner/Operator: James Markham

Servicing the Rigging Industry since January 2011



Offroad Products



Rope Protector Sleeves

Protecting your winch line in a harsh environment can be a very trying thing. Protect your winch line from Rocks, trees and cactus with our rope protection sleeve. Made from ballistic nylon with a Velcro closer makes this product easy to install on any extended winch line and easily put where protection is needed. They come in a 4Ft. length and are made so you can join multiple lengths together if needed. A must for every recovery bag, and MADE IN THE USA.

Ballistic Black Nylon Protector Sleeve, 4Ft. P/N RPS-4



Recovery Blocks, Split Sheave

Split sheaves or snatch blocks can come in handy when needing to double the line pulling power of your winch, or change your pulling direction without damaging your winch line. They can also reduce heat buildup and amp draw from your winch. These pulleys were designed to be lightweight and small, yet extremely strong. Many conventional snatch blocks or split sheaves are heavy, large, and cumbersome. They take up unnecessary space in the vehicle and make rigging much more difficult.

Sheave diameter along with bearing efficiency determines the efficiency of the block. Larger sheave diameters produce greater pulley efficiencies. The bushing or bearing is the load bearing member between the sheave and the axle. A bushing spreads the load over a larger area of the axle. This results in greater transfer and very little wear and extremely long life of the pulley. Bearings decrease the amount of surface area in contact with the axle which creates a more efficient transfer by rolling the load around the axle. Load on the transfer point is increased which results in faster wear, shorting the life of the pulley. The axle is the primary determinant of overall strength. Our axle is made of stainless steel with special corrosion-resistant nuts ensuring a lifetime of resistance to the elements. Our sideplates are stainless steel, very strong and resistant to the elements. We use lightweight aluminum sheaves for rope efficiency. NOTE: Steel sheaves should only be used for steel cable.

Split Sheave Pulley, 4” Aluminum Sheave, Bushing, Stainless Steel Side plates. P/N SS122

Split Sheave Pulley, 4” Aluminum Sheave, Bearing, Stainless Steel Side plates. P/N SS123


Weight: 2lb 3 oz.

Sheave diameter: 4”

Size: 8” x 4-3/4”

Working load: 20,000lbs

Max rope diameter; 5/8”

Extremely lightweight for easy rigging

Compact size saves space





We also offer the same split sheave in a smaller size and lower capacity. Has all the same parts and makeup just smaller and lighter.


Split Sheave Pulley, 3” Aluminum Sheave, Bushing, Stainless Steel Side plates. P/N SS105

Split Sheave Pulley, 3” Aluminum Sheave, Bearing, Stainless Steel Side plates. P/N SS106

Weight: 1Lb 5oz

Sheave diameter: 3”

Size: 6-1/2” x 4-1/4”

Working load: 16,000Lbs

Max rope diameter: 5/8”

Extremely lightweight for easy rigging

Compact size saves space